Aluminum Formwork Accessories Scaffold Al Bracket Diagonal Brace

• After-sales Service: No
• Warranty: No
• Certification: ISO, ROHS, CE, SGS
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: Diagonal Brace
• Material: Q235 Carbon Steel
• Surface Treatment 1: Galvanized
• Category: Aluminum Formwork Accessory
• Used: Concrete Formwork/Aluminum Formwork System
• Color: Silver White/Yellow
• Application: Formwork System
• Transport Package: in Bundle/Bags
• Specification: 400-600
• Trademark: SanYe
• Origin: China
• HS Code: 7308400000
• Production Capacity: 1000PCS/Days
• Package Size: 100.00cm * 20.00cm * 20.00cm
• Package Gross Weight: 3.000kg

Product Description

Aluminum Formwork Accessories Scaffold Al Bracket Diagonal Brace

Product Description

Product Description
Angled push-pull struts for supporting wall formwork Sloping panel brackets with swivel end plates can accommodate vertical and horizontal loads. Its two ends are respectively fixed on two wall forms at 90 degrees. By adjusting the rotatable handle, the angle of the wall formwork on both sides of the wall formwork can be adjusted and fixed. Due to their high strength, inclined panel supports are used in the construction of houses and high-rise buildings. Various surface treatments such as zinc sheet and hot dip galvanized are available. The available length of push-pull struts is 400~600mm. quick adjustment Thanks to the telescopic design, working length adjustments can be made in seconds. The required adjustments only require a few turns of formwork panel support. On-site operation is very simple All inclined panel brackets can be assembled on site.

Structure	Single-side Bracket
Product name	Al-bracket / Diagonal Brace
Packing	Bag/Pallet
Material	Q235 Carbon Steel
Size	400-600
Surface treatment	Galvanized
Color	Silver White/Yellow
Application	Formwork System

 

1. Increase overall stability

Diagonal bracing is a very commonly used method for reinforcing aluminum formwork walls. It can increase the stability of the overall structure by dispersing the stress inside the wall. In the reinforcement of buildings in different regions and shapes, diagonal bracing is almost always an indispensable structural form. Through the reasonable setting of wall diagonal braces, the overall stability of the building can be increased, its earthquake resistance can be improved, and the safety of the building can be ensured.

2. Resist lateral load

Another important function of diagonal braces is to resist lateral loads. In natural environments such as earthquakes, buildings are often subject to lateral impact forces. At this time, reasonable reinforcement measures are needed to increase the seismic resistance of the building. In aluminum formwork wall reinforcement, the setting of diagonal braces can effectively reduce the deformation and cracking of the wall under lateral loads, thereby protecting the integrity of the overall structure of the building.

 

 

3. Bear horizontal load

In addition to resisting lateral loads, walls may also be subject to horizontal loads under certain circumstances. For example, in the early stages of building design, if environmental factors are not taken into account or the load on the wall is not correctly estimated, uneven stress on the wall may occur. At this time, it is also necessary to adjust the diagonal bracing. The load-bearing capacity of the wall to ensure the stability and safety of the building.

 

 

Company Profile

 

   Hebei SanThriving Company is a professional aluminum formwork accessories and construction fastener manufacturer in China. The factory is locaed in Fastener Production Base Site---Yongnian area of Handan, The total area is 30.000 square meters. Since 2005 we established factory until now, There are more than 200 employees in our factory and we have more than 15 year production experience. We have advanced production equipment and rich experience research development group. Our unique service is supply Customised Products for our clients. The mian products are Wedge pin, Round pin, stud pin, long pin, steel prop, tie rod and tie nut, flat wall tie, swivel clamp, swivel coupler,waller clamp, waller bracket, al-bracket and aluminum formwork tools, we are also produce hex bolt, thread rod, wedge anchor bolt and nuts. These products are sell to all over the world. The service of SanThriving company are Quality First, Service Supreme. We will continue to service our client in the future. We sincerely the client if you don t satisfied please kindly tell us, if you are very satisfied with us then tell your friends and help more people to share our service and products.

FAQ

1. Who Are We?

We Are Professional Aluminum Formwork Accessories Manufacturer And Located Fastener Producing Base Site Yongnian Area Of Handan City Of  China, Start From 2005,Our Products Sell To Mid East(20.00%),North America(20.00%),Southeast Asia(15.00%),South America(10.00%),Eastern Asia(10.00%),Eastern Europe(10.00%),South Asia(10.00%),Africa(5.00%). There Are Total About 101-200 People In Our Factory.

2. How Can We Guarantee Quality?

Always A Pre-Production Sample Before Mass Production;
Always Final Inspection Before Shipment;

3.What Can You Buy From Us?

Aluminum Formwork Accessories Such As Wedge Pin, Mivan Stud Pin, Long Pin,Thread Rod,Tie Rod And Wing Nut, Swivel Coupler,Steel Prop, Swivel Clamp, Al-Bracket, Waller Bracket, Waller Clamp, Flat Wall Tie, Flat Tie, Hex Bolt, Hex Nut, Stud Bolt And Wedge Anchor Bolt.

4. Why Should You Buy From Us Not From Other Suppliers?

Through 17 Years Of Operation And Development, Our Products Have Good Quality With Lowese Price, Our Unique Service Is Supply Products Customized For Our Client.

5. What Services Can We Provide?

Accepted Delivery Terms: Fob,Cfr,Cif;
Accepted Payment Currency:Usd,Cny;
Accepted Payment Type: T/T,L/C,Credit Card,Cash;
Language Spoken:English,Chinese